View previous topic :: View next topic |
Author |
Message |
Axis -
Joined: 29 Sep 2003 Posts: 336
|
Posted: Mon Oct 06, 2003 7:43 pm Post subject: nph-proxy.cgi |
|
|
Hi Aprelium people--
Has anyone installed nph.proxy in Aprelium successfully? It is a simple, 1 page script you can find at:
http://www.jmarshall.com/tools/cgiproxy/
I have installed this script on a Apache server no sweat.
When I run this script in Aprelium (Abyss Web Server version X1) I get the message:
"WARNING: Entering non-anonymous area!
This proxy only supports HTTP and FTP. Any browsing to another URL will be directly from your browser, and no longer anonymous.
Follow the link below to exit your anonymous browsing session, and continue to the URL non-anonymously."
Ok, I know this comes from the very bottom of the script. And it has something to do with its parsing of a nph script. (Or not parsing).
In the Aprelium guide it says:
"Abyss Web Server automatically detects NPH (Non Parsed Headers) scripts. NPH scripts' output is sent directly to the browser without prior header decoding by the server. It is up to NPH scripts to generate correctly all the necessary HTTP response headers. Abyss Web Server considers a script to be NPH if the first line it outputs starts with the string HTTP/."
Anyway, does anyone know the correct steps to configure nph-proxy.cgi for Aprelium?
Thanks in advance for any help!
Axis |
|
Back to top |
|
|
aprelium -
Joined: 22 Mar 2002 Posts: 6800
|
Posted: Tue Oct 07, 2003 12:28 am Post subject: Re: nph-proxy.cgi |
|
|
It may be a script configuration problem. We recommend reading the setup/installation guide of the script for more information. If the problem persists, please send us the script to support@aprelium.com (we were unable to download it now, the site seems to be down). _________________ Support Team
Aprelium - http://www.aprelium.com |
|
Back to top |
|
|
Axis -
Joined: 29 Sep 2003 Posts: 336
|
Posted: Tue Oct 07, 2003 5:03 am Post subject: |
|
|
Thank you for responding!
The code is below. I have the shebang line pointing to my perl interpeter in my own copy. Again, thanks for the looking.
(code removed in "edit" mode because it was so durn long...)
Last edited by Axis on Sat Oct 18, 2003 6:52 pm; edited 1 time in total |
|
Back to top |
|
|
Axis -
Joined: 29 Sep 2003 Posts: 336
|
Posted: Tue Oct 07, 2003 9:47 pm Post subject: |
|
|
The script was so long that it timed out the php. Even though the post went through it is not registered on the BB so I am putting this here so you will know there has been a new post. (Sorry about the size!)
Regards,
Axis |
|
Back to top |
|
|
aprelium -
Joined: 22 Mar 2002 Posts: 6800
|
Posted: Wed Oct 08, 2003 11:27 pm Post subject: |
|
|
Axis wrote: | The script was so long that it timed out the php. Even though the post went through it is not registered on the BB so I am putting this here so you will know there has been a new post. (Sorry about the size!)
Regards,
Axis |
It is better if you send it to us by mail to support@aprelium.com . _________________ Support Team
Aprelium - http://www.aprelium.com |
|
Back to top |
|
|
Axis -
Joined: 29 Sep 2003 Posts: 336
|
Posted: Thu Oct 09, 2003 1:19 am Post subject: |
|
|
Thanks much for the reply. It is sent!
By the way, I think Abyss is GREAT!
Kind Regards,
Axis |
|
Back to top |
|
|
Optalamia -
Joined: 18 Oct 2003 Posts: 5 Location: Germany
|
Posted: Sat Oct 18, 2003 6:17 pm Post subject: |
|
|
i also use nph-proxy
it's nice
but on localhost it's not allowed to use.
I think you can remove localhost (127.0.0.1) from the intern blacklist
but it didn't work, too
I think it's because the special URL-param-given: they are looking like a path.
example: nph-proxy.cgi/1010101/http/wanted_url
but this was with omniHTTPd.
because of this I try aprelium now
but with apache in the server of my university it's working nice
I will trie it now @ localhost with aprelium ... if it works I'll tell it _________________ #!/usr/bin/perl |
|
Back to top |
|
|
Axis -
Joined: 29 Sep 2003 Posts: 336
|
Posted: Sat Oct 18, 2003 6:49 pm Post subject: |
|
|
Hi Optalamia--
In my conversation with the Aprelium people regarding this issue, they discovered one small snippet of code error in the Abyss Server software. They are planning to fix this, I believe, with the next release.
In the mean time, if you have the same problem I did, it is easily solved by adding a "/" at the end of the url calling nph-proxy as in:
http://sixa.no-ip.info/cgi-bin/nph-proxy.cgi/
I hope this helps!
Regards,
Axis |
|
Back to top |
|
|
rose -
Joined: 02 Nov 2004 Posts: 1
|
Posted: Tue Nov 02, 2004 5:38 am Post subject: CGIProxy still not working |
|
|
Hi Axis ou Aprelium,
I still have no luck running this script correctly. It runs but when it is supposed to create the proxy pages, it chokes on this link:
http://aa.bb.cc.dd/cgi-bin/nph-proxy.cgi/010110A/x-proxy/start
How did you guys make it work?
-Rose |
|
Back to top |
|
|
Axis -
Joined: 29 Sep 2003 Posts: 336
|
|
Back to top |
|
|
edstrang -
Joined: 18 Mar 2005 Posts: 10 Location: UK
|
Posted: Wed Mar 30, 2005 11:12 am Post subject: |
|
|
Its because your using a HTTPS:// Domain Not a HTTP://
I Think... _________________ If I Dont Know It, It's Not Worth Knowing :-) |
|
Back to top |
|
|
1pkr -
Joined: 07 Sep 2008 Posts: 1
|
|
Back to top |
|
|
|