Search found 1355 matches

Dear all,

MyCommerce/Digital River were our payment processor since the end of operations of the late SWREG in 2018 (see https://aprelium.com/forum/posting.php?mode=editpost&p=674355.)

But d ...

Hello,
the new design of this program is neat with even the new ability to export the google map as PNG.

It also got more features for the port scan, traceroute & the DNS data tabs.

Perhaps ...

Wow thank you for such great feedback, ideas and inspiration!

I think I started out very simple and got stuck in a rut however your ideas are very relevant and valid!

I will work on it further a ...

Hi,
I thought that you could try a different layout UI-wise for fitting more controls into a smaller area:

You could use a MenuBar for the program options, a SysListView for text information & ...

As we discussed by email, the 20-second blackout issues seem to be caused by a visitor "stealing" all your bandwidth and saturating all your connections.

Admin: Could you discuss this par ...

While I have privately written to the Aprelium support team on previous occasions regarding this issue, I wanted to post something publicly here in this support forum to see what kind of feedback I ge ...

Is it possible to set up Abyss web server reverse proxy to use with MeshCentral?
It is quite easy to set up with NGINX but not sure if it's even possible with Abyss.

These are the docs to use with ...

jakkwb,

tiamat.westweb1.net pings just fine.
westweb1.net pings too.

But www.westweb1.net is an unknown name. You must declare it in the DNS records of westweb1.net.

If the problem persists, ...

I have a sucessfull install on windows and am moving it to linux. When I try to start the server on port 80 on linux I get a "Listening error".
Can anyone tell me how I can fix this so it r ...

I have a sucessfull install on windows and am moving it to linux. When I try to start the server on port 80 on linux I get a "Listening error".
Can anyone tell me how I can fix this so it r ...

I have a sucessfull install on windows and am moving it to linux. When I try to start the server on port 80 on linux I get a "Listening error".
Can anyone tell me how I can fix this so it r ...

James Cook,

Before DNS was invented in the mid-80s, network admins connected to ARPANET used to share the HOSTS file updated with new entries and their IPs.

You still can use the same idea on yo ...

FYI for anyone running across this thread that wants to (kinda) automate LetsEncrypt wildcard certs with a DNS-01 challenge, I got with Tech Support and apparently Abyss currently can't do this, but i ...

I'm trying to get my sites to do LetsEncrypt DNS provisioning using a LE wildcard cert, but following these instructions, it's still requesting a specific hostname (i.e. "host.domain.com" ra ...

In setting up and testing sites, I can set localhost as the Host Name for any site and readily access that site while working on the server itself.

That only works for one site at a time though, an ...

Hello all!

Here to contribute another guide for those who may be interested in implementing SSL on their web server in a straightforward way.

All this will require is your running AAWS (Apreliu ...

Hi

If I used a VPN, what would be the steps for just me being able to view the web server outside of the LAN?

I am currently using a dns service that means I couldn't use a VPS so it would need ...

Hi

If I used a VPN, what would be the steps for just me being able to view the web server outside of the LAN?

I am currently using a dns service that means I couldn't use a VPS so it would need ...

... nope ...

the hMailServer don't touch the files; just read it.
I also have copy the two files in the hMail- folder and use it. That also don't work.

It makes no difference whether I integra ...

... nope ...

the hMailServer don't touch the files; just read it.
I also have copy the two files in the hMail- folder and use it. That also don't work.

It makes no difference whether I integra ...

Is there any way currently to tell Abyss to use DNS rather than HTTP provisioning?

This is possible and even required when requesting certificates for wildcard host names (*.example.com).

To do ...

I'm trying my first LetsEncrypt implementation and got everything configured, but the Abyss ACME client seems to be going straight to the option of provisioning an HTTP resource, rather than giving th ...

Hi Jim. I was just reading up on HSTS at Note: The Strict-Transport-Security header is ignored by the browser when your site is accessed using HTTP; this is because an attacker may intercept HTTP conn ...

Matcha,

Thank you for the detailed account of your experience with X2.

But there are some clarifications that we have to make:

First, and by default, if you upgrade from X1 to X2, there is no ...

I have the same problem, and have sent an email to support a couple of days ago, no response yet. I seen where others have had the same problem , but I have not seen a resolution

My data set is ab ...

I'm posting this in the hope that it will help some people out there, it works for me 100% and is easy for a novice.

If you have a linksys router (pre v5 with linux - mine is WRT54G v1.1) you may ...

When I tried and failed today to change my DNS record to a new IP and my local server, I got the following ticket

"Thanks for your reply.

I'm afraid for a reference only there is no DNS en ...

Hi John,

The solution to accessing your sites using your domain name locally would be to install a DNS server on your local network and configure your computers to use that as their primary DNS. Al ...

I'll appreciate any assistance on this. The scenario;

I have a database table with the following sample records;

data1----------------dt2----data3------data4---------data5------data6
Brewing Pl ...

How to fix your problem.

Go to and open this file with notepad.C:\Windows\System32\drivers\etc\hosts

It should look something like this.
# Copyright (c) 1993-2009 Microsoft Corp.
# ...

I have a web server set up along with a no-ip.com DNS. However I am not sure how to hide my actual IP that is shown once the page is accessed. Anyone that can help?

You have that behavior because ...

I have a web server set up along with a no-ip.com DNS. However I am not sure how to hide my actual IP that is shown once the page is accessed. Anyone that can help?

I was using Abyss for quite a while now. I started with static html pages then my clients wanted database driven dynamic asp pages and now everything is going ASP.NET.

After extensive development ...

ping www.stds9.com
Ping request could not find host www.stds9.com. Please check the name and try again.

Looks like the problem is in the DNS specification, nothing to do with Abyss.

Reg ...

Hi!
As you have seen from title any page that I have where php is connecting to a database takes 12.3 seconds. No matter what content there is, who wrote the code, how well known the code is, where i ...

Hello. First and foremost, my background. I repair pc's for a
living, I reinstall software, etc. So as far as technical lingo and
performing pc based tasks, I am well qualified. As far as settin ...

here is the problem:
i have an account to no-ip, i download a dns update client there so it updates my ip to a certain address, so when i type the address to convert it to my ip actual ip address thi ...

I'm getting an erro when trying to count the number of records obtained from a mysql db. the error states:

Warning: mysql_num_rows(): supplied argument is not a valid MySQL result resource in C:\P ...

For Static IP Addresses:
FREE URL Forwarding (can be disabled)FREE Email Forwarding (can be disabled)FREE DNS Management for every domain you register through or transfer to FREE Domain Locking / Tra ...

and in response to you, crazy, if you want people to be able to have you@yourdomain.com you will need to do the following:

1. (obviously) get a domain name - use 000domains.com: 13.50 per year with ...

My DNS is set up so all subdomains point to the my domain so anything like www.wepcrepair.com, [url=http://asd.wepcrepair.com/]asd.wepcrepair.com, [url=http://crack.wepcrepair.com/]crack.wepcrepair.co ...

Ok so I've got a server and it's currently sitting on my local network with a static route from my router. However I need to switch it over to a different public IP that's on a T1 line but I can't aff ...

Hey guys,
Ok so here's the deal. I have my Abyss server sitting behind my firewall and that's connected to a 1Mb/up (on a good day) 6Mb/down connection. Well we just started doing video webcasting ...

Heres my setup briefly:

4x compaq presarios, each with 2.2 processor, 1 gig ram and internal and external 160gb hard drives. (NOTE: external HD is for videos, images and other user files etc.

Al ...

I'm not very sure what to say about the password you're required to enter. I've tried to connect and it would fail. I've tried to telnet and it looks like there is no application on port 80.
Port 800 ...

ok now i have everything fixed, my port is open, i have a DNS name from no-ip.com.. those two steps are fine now, the problem now is my site is still unaccessible.. what could be the other problem?? c ...

ok now i have everything fixed, my port is open, i have a DNS name from no-ip.com.. those two steps are fine now, the problem now is my site is still unaccessible.. what could be the other problem?? c ...

Yeah, I kinda figured it out after I've posted this topic.

I'm sorry for the trouble and thanks for checking it out for me. ^^

BTW, do you know any DNS provider like no-ip that will forward a su ...

OK, I'm pretty much frustrated right now.

See, the thing is, I'm not new with Abyss, I have setup my own webserver before (but admittedly, it was a long time ago).

Anyway, my problem is that, ot ...

mainly, i don't think i can run multiple instances of the dynamic update client.

basically zoneedit works off of ips. you have a domain, you get a zoneedit dns server, and you specify your ip.

M ...